If you want your Pentair water softener to run as efficiently as possible, and if you want it to run for as long as possible, you’ll need to provide it with adequate maintenance. Routine maintenance will help your water softener run smoothly, thereby reducing wear and tear.
Are you interested in learning how to maintain your Pentair water softener? If so, you’ve come to the right place. This water softening company in St Charles, Illinois is going to provide some helpful tips below.
Refill the Salt on Time
For a water softener to function properly, it must be filled with softener salt. This salt adds sodium ions to the water, thereby allowing the machine to remove calcium and magnesium ions.
Over time, however, the softener salt depletes. As such, every one-to-two months, you’ll need to add new salt. Failure to refill the salt in time will result in a non-functional water softener. The longer it’s non-functional, the greater likelihood there is of incurring pipe buildup, limescale buildup, and the like.
With that said, you’ll want to check the salt storage compartment every few weeks and refill it. If necessary, your local water softening company in St Charles, Illinois can help you with this task.
Clean the Brine Tank
Every year or so, you should clean the softener’s brine tank. If you don’t, the softener could struggle with blockages and impairments. It could also take on mold growth, compromising the quality of your water.
How do you go about cleaning your brine tank? First, wait for your last batch of salt to run out. Once it does, use a long, narrow tool to break up chunks of remaining salt on the bottom of the tank.
Then, add water and detergent to the tank and scrub the inside with a brush. If mold is present, consider using a mold removal substance to eliminate it.
Clean the Resin Tank
In addition to cleaning the brine tank, any reputable St Charles water softening company will also recommend cleaning the resin tank. Note, though, that this doesn’t have to be done as often. In general, you can do it every other year.
To clean the resin tank, simply add an iron cleaning solution. This will remove a good deal of iron from the resin beads, returning a great deal of their efficacy.
Replace the Resin Beads
At some point, you’re also going to have to replace the resin beads within your resin tank. These are responsible for holding sodium ions and transferring them with calcium and magnesium ions. As such, over time, they become inundated with calcium and magnesium, and tend to lose their efficacy.
In most cases, resin beads stop working after seven or eight years of use. Therefore, when the time comes, you’ll want to keep an eye out for signs of non-functionality. The second you notice hard water reappearing, it’s time to swap out those resin beads.
Have the Water Softener Inspected By a Professional
Despite all the work that you put into maintaining your water softener, it could still have problems over time. Oftentimes, you won’t even know that these problems exist. As such, every year or so, it’s wise to have your water softener inspected by your local water softening company in St Charles, Illinois.
Their technicians will inspect all aspects of your Pentair water softener and ensure that they’re still working. They can also clean the system as needed.
Interested in Installing a Pentair Water Softener? Contact the Best Water Softening Company in St Charles, Illinois.
Are you looking for a professional who can properly maintain your water softener? Looking for the best water softening company in St Charles, Illinois? If so, the experts at Johnson Water Conditioning are the people to call.
Contact us today to discuss your options.