Here in the Oswego area, the water is filled with excess levels of magnesium and calcium. Over time, these two minerals tend to cling to the interior walls of water pipes. As this occurs, the pipes become more and more narrow, leading to reduced water pressure throughout the home.
Fortunately, there is an effective way to counteract this problem: you can install a Pentair water softener. Are you interested in learning more about it and the effect it can have on your water pipes? This Pentair water softening company in Oswego, Illinois is going to explain below.
Hard Water and Water Pipes: Understanding the Issue
We’ve already alluded to this in the intro, but let’s go into a little more detail. When calcium and magnesium exist in high levels in water, they tend to cling to the interiors of water pipes. As time passes, these two minerals accumulate more and more. Eventually, this causes the pipe to become narrower.
At first, this results in a lack of water pressure. However, eventually, it can result in the pipe closing entirely. When this occurs, water pressure ceases to be. In other words, water can’t make its way through the pipe.
Unfortunately, once a pipe reaches this point, it will have to be replaced. This is not only a stressful and annoying thing to have to do, but it’s also a potentially costly one.
Therefore, it’s best to avoid this issue entirely. Your Pentair water softening company in Oswego, Illinois can install a system that will remove all the calcium and magnesium from your water supply, which will eliminate issues with your pipes.
How the Water Softener Does Its Job
We’ve discussed the way that hard water affects water pipes. Now, let’s discuss how the Pentair water softener combats that effect. As was noted above, it’s all about the way that the water softener removes magnesium and calcium from the water supply.
What you might wonder, though, is how it goes about doing this, and how effective is it? As any Pentair water softening company in Oswego, Illinois will tell you, the water softener is almost 100% effective at removing magnesium and calcium particles from a water supply. It ensures this success rate by utilizing a scientific process called ion exchange.
In this process, positively charged ions switch places with negatively charged ions. With the water softener, specifically, sodium ions switch places with calcium and magnesium ions.
They do this with the help of resin beads. These beads are added to the tank of the water softener. Then, softener salt is added to the tank as well. Once the salt has been added, the sodium clings to the beads. The softener is now ready to do its job.
As hard water passes through the softener, the sodium ions leave the beads, making room for magnesium and calcium ions. The calcium and magnesium exit the water while the sodium enters the water.
Once the water leaves the water softener, it’s void of all calcium and magnesium, containing just miniscule amounts of sodium instead. This sodium has a negligible effect on the water’s quality, and the water, ultimately, can’t do any damage to the water pipes. If you have any additional questions about the process, do not hesitate to get in touch with a Pentair water softening company in Oswego, Illinois.
Looking for a Pentair Water Softening Company in Oswego, Illinois?
Are you hoping to preserve your home’s water pipes? If so, Johnson Water Conditioning is the company to call. As the most trusted Pentair water softening company in Oswego, Illinois, our crew has installed Pentair waters softeners in countless homes throughout the area.
Contact us today to request a free estimate.