Most people think of water softeners as basic salt tanks. But today’s softeners are much more advanced. A perfect example is Pentair’s Easy-iQ controller. This compact device is the “brain” of many Pentair water softeners, and it does much more than turn the softener on and off.

Below, this Pentair water softening company in Plainfield, Illinois is going to explain how a controller like the Easy-iQ can improve your softener’s performance.

Like any appliance, even the best water softeners don’t last forever. But how soon that happens depends on a few factors. Below, this Pentair water softening contractor in Westmont, Illinois is going to explain how long a softener typically lasts, and what signs you should look for when it’s nearing the end of its lifespan.

If your water softener’s brine tank is completely dry, is that a problem? Yes, it is. This Pentair water softening contractor in Burr Ridge, Illinois, is going to explain what happens when there is no salt left in your softener.

If you have a water softener at home, you are probably aware that it runs on salt. But when it is time to restock on salt, what should you buy? Solar salt? Pellets? Crystals? Potassium? Does it even matter which one you choose?

It does. Below, this Pentair water softening contractor in Wauconda, Illinois is going to explain how the type of salt affects your softener’s performance.

If you have a water softener at home, you already know that adding salt is a necessary part of the process. But is that all it needs? Not quite.

Keeping your softener running smoothly requires more than just topping off the salt bucket. Below, this Pentair water softening contractor in Libertyville, Illinois is going to explain the type of maintenance your softener requires to last for years.

Shopping for a water softener can get confusing, especially when you see a bunch of numbers that you don’t really understand. You will probably see one system with a 32,000-grain capacity, then another that is talking about gallons per minute. So, which number should you truly care about more when you are trying to choose a water softener for your home?

Below, this Pentair water softening contractor in Algonquin, Illinois is going to explain how these two numbers go hand in hand.

If you thought your softened water tasted a little salty, you are not the only one who has had that reaction. It might seem like a weird thing to happen, but there is usually a simple reason behind it.

Below, this Pentair water softening contractor in Huntley, Illinois is going to explain why your soft water might taste a little strange sometimes. 

If you use a water softener at home, the way it resets and cleans itself can affect the quality of your water every day. When the system regenerates too frequently, it can waste a lot of salt and water. But if it waits too long to do the cleaning cycle, you might start getting hard water in your showers, your laundry, and all your faucets.

This Pentair water softening contractor in Lake in the Hills, Illinois is going to explain the difference between metered and time-clock regeneration below.

Installing a whole-house water softener involves more than choosing the right model. The softener also needs the right location, plumbing, power, and drainage to protect your home from hard water.

Below, this Pentair water softening company in Woodridge, Illinois is going to explain what’s needed for a successful installation.

When you load the dishwasher and run a full cycle, you expect clean dishes in the end. But when you’re done, do you see cloudy glasses and spots on your dishes? What’s going on?

Below, this Pentair water softening company in Oswego, Illinois is going to explain what causes those spots and how to stop them.